ABB PFCL201C/CD张力传感器使用配置手册

产品标题：ABB PFCL201C/CD张力传感器使用配置手册

型号：ABB PFCL201C/CD张力传感器

品牌： ABB

质保：七天验收期，质保期一年

交货期： 1-3个工作日

产品图片展示

产品详情资料：

ABB PFCL201C/CD张力传感器

PACSystems ABB PFCL201C/CD以太网IEC 104服务器模块，目录号ABB PFCL201C/CD，实现IEC 60870-5-104通信协议。它允许PACSystems RX3i控制器使用标准TCP/IP连接方案连接到以太网，允许IEC 104客户端从服务器轮询数据，并生成从服务器返回客户端的未经请求的通信。两个自动感应10BaseT/100BaseTX RJ-45屏蔽双绞线以太网端口允许在没有外部收发器的情况下直接连接到10BaseT或100BaseTX IEEE 802.3网络。支持线性、星形和菊花链拓扑。ABB PFCL201C/CD以太网IEC 104服务器该模块在通用ABB PFCL201C/CDETM001模块硬件平台上承载IEC104服务器端协议。因此，许多规范和行为与ETM001模块共享，包括协议支持。ABB PFCL201C/CD是一个以太网连接模块，适用于RX3i背板，并允许RX3i在IEC104网络上充当服务器。EIS001模块和IEC104客户端之间的数据交换是可配置的，使用梯形图逻辑或结构化文本程序中的单个COMMREQ指令。

产品英文详情资料：

The PACSystems ABB PFCL201C/CD Ethernet IEC 104 Server The module, catalog number ABB PFCL201C/CD, implements the IEC 60870-5-104 communications protocol. It permits a PACSystems ABB PFCL201C/CD controller to be connected to an Ethernet network using a standard TCP/IP connection scheme, allowing an IEC 104 Client to poll data from the Server, as well generate unsolicited communications from the Server back to the Client. Two auto-sensing 10BaseT/100BaseTX RJ-45 shielded twisted-pair Ethernet ports permit direct connection to either a 10BaseT or 100BaseTX IEEE 802.3 network without an external transceiver. Line, Star and Daisy Chain topologies are supported. The RX3i Ethernet IEC 104 Server The module hosts the IEC104 Server side protocol on a common RX3i ETM001 module hardware platform. Thus, many of the specifications and behaviors are shared with the ETM001 module including protocol support. ABB PFCL201C/CD is an Ethernet-connected module that fits in the ABB PFCL201C/CD backplane and permits the RX3i to behave as a Server on the IEC104 network. The data exchanges between the EIS001 module and IEC104 Client(s) are configurable, using a single COMMREQ instruction in the ladder logic or Structured Text program.