YOKOGAWA CP451-51采集卡使用配置教程

YOKOGAWA CP451-51采集卡使用配置教程在2区安装F3 DIO 16/8 01（EC指令94/9/EC，ATEX）远程I/O适用于2区安装。请参阅HIMA网站上相应的符合性声明。安装设备时，请遵守以下章节中规定的特殊条件。特殊条件X将远程I/O安装在符合EN 60079-15要求的外壳中，并根据EN 60529达到至少IP54的防护等级。为外壳提供以下标签：仅允许在断电状态下工作YOKOGAWA CP451-51采集卡使用配置教程

YOKOGAWA CP451-51采集卡使用配置教程Mounting the F3 DIO 16/8 01 in Zone 2 (EC Directive 94/9/EC, ATEX) The remote I/O is suitable for mounting in zone 2. Refer to the corresponding declaration of conformity available on the HIMA website. When mounting the device, observe the special conditions specified in the following section. Special Conditions XMount the remote I/O in an enclosure that meets the EN 60079-15 requirements and achieves a type of protection of at least IP54, in accordance with EN 60529. Provide the enclosure with the following label: Work is only permitted in the de-energized stateYOKOGAWA CP451-51采集卡使用配置教程