产品标题：TSX07311628扩展模块

产品型号：TSX07311628

品牌：模块

质保：七天验收期，质保期一年

交货期： 1-3个工作

产品图片展示

产品详情资料

TSX07311628 扩展模块 15 条特点

1. TSX07311628 为施耐德 TSX07 系列 PLC 配套数字量扩展模块，适配 TSX07 主机进行点位扩容。
2. 集成 16 路 24VDC 数字通道，输入输出组合配置，可外接传感器、小型执行元件。
3. 通过专用扩展线缆直连 TSX07 主控单元，总线通讯稳定，逻辑信号同步性良好。
4. 支持漏型输入规格，兼容主流 NPN 型接近开关、光电开关等现场检测器件。
5. 输出回路电气隔离设计，减少现场负载干扰反向窜入主控，保护 PLC 核心单元。
6. 模块自带通道状态 LED 指示灯，每一路信号通断状态可视化，便于检修 TSX07311628。
7. 采用 35mm 标准 DIN 导轨安装，外形紧凑，便于小型控制柜内密集排布。
8. 阻燃塑料外壳，IP20 防护等级，适用于电控柜内部常规工业环境。
9. DC24V 工作供电，电压耐受区间宽，可应对工业电网小幅电压波动。
10. 端子排布规整清晰，标识印刷标准，降低接线失误，方便日常巡检维护。
11. 内置过流防护电路，负载短路时限制电流，降低模块损坏风险。
12. 可多级搭配扩展，灵活拓展 I/O 数量，适配中小型自动化设备逻辑控制需求。
13. 硬件兼容 PL7-07 编程软件，组态简单，无需复杂参数设置即可投入使用。
14. 具备基础 EMC 抗干扰性能，可配套变频器、直流电机驱动类成套设备使用。
15. TSX07311628 属于老旧成熟扩展配件，大量用于轻工流水线、包装设备改造替换。

Product Details

#TSX07311628 Expansion Module 15 Features

TSX07311628 is a digital expansion module for Schneider TSX07 series PLC, which is compatible with TSX07 host for point expansion.
2. Integrated 16 channels of 24VDC digital channels, input/output combination configuration, can be connected with external sensors and small actuators.
3. Connect the TSX07 main control unit directly through a dedicated expansion cable, ensuring stable bus communication and good logic signal synchronization.
4. Supports leakage input specifications and is compatible with mainstream NPN proximity switches, photoelectric switches, and other on-site detection devices.
5. The electrical isolation design of the output circuit reduces on-site load interference and reverse entry into the main control, protecting the PLC core unit.
6. The module comes with channel status LED indicator lights, and the on/off status of each signal is visualized for easy maintenance of TSX07311628.
7. Installed with 35mm standard DIN rails, it has a compact appearance and is easy to densely arrange in small control cabinets.
8. Flame retardant plastic shell, IP20 protection level, suitable for conventional industrial environments inside electrical control cabinets.
9. DC24V working power supply, with a wide voltage tolerance range, can cope with small voltage fluctuations in industrial power grids.
10. The terminal layout is neat and clear, with standardized labeling and printing to reduce wiring errors and facilitate daily inspection and maintenance.
11. Built in overcurrent protection circuit limits current in case of load short circuit, reducing the risk of module damage.
12. It can be expanded in multiple levels, flexibly increasing the number of I/O and adapting to the logic control needs of small and medium-sized automation equipment.
13. The hardware is compatible with PL7-07 programming software, with simple configuration and no need for complex parameter settings to put it into use.
14. It has basic EMC anti-interference performance and can be used with complete sets of equipment such as frequency converters and DC motor drives.
TSX07311628 is an old and mature expansion accessory, widely used for the renovation and replacement of light industry assembly lines and packaging equipment.

其他产品